NewPro Zinc Dust Paint - Gray
Article code: 0039-93636
High heat resistant anticorrosive primer. Can also be used as a single layer paint indoors.
Substrates / surface preparation:
substrates must be absolutely clean, dry and free of grease and dust
structural steel, sheet steel: | (roughing up) cleaning / degreasing |
galvanized steel: |
|
HANDLING AND APPLICATION
Storage stability: At least 6 months when stored in original, un-opened packages at temperatures between 15 and 25°C (60 - 85°F).
By repeated opening and closing of the container the product may become unusable by reactions with atmospheric moisture. Opened containers must be sealed well and used up as soon as possible.
Thinner: NewProSol thinner special Article no.: 0089-00580
Application:
Before application, the color shade and the compatibility with the substrate should be tested. Object-, material and ambient temperature should not be below 15° C (49° F) and not above 25° C (77° F) and must be at least 5° above the dew point.
On carefully blasted substrates spraying processes are preferred. If there are visible traces of corrosion products, the material should be applied intensively by brush or roller into the substrate. Before processing the product has to be set to the required viscosity for the respective application method.
All values given are just examples, the actual settings are process- and system-dependent |
| Viscosity: | Nozzle diameter | Spray pressure | ||
(mm) | (mil) | (bar) | (psi) | |||
Airless spraying | not diluted | 0.5 – 0.8 | 20 - 31 | 50 - 100 | 725-1450 | |
Cup gun | not diluted | 2 | 78 | 2.5 | 29 | |
Brush/roller | To avoid faults in surface finish (differences in film thickness depending on working direction), apply undiluted material and smooth it in accordance with good professional practice. | |||||
Theoretical spreading rate:
Drying time: (at standard climate 23°C (73°F) / 50 % rel. humidity and adequate air circulation)
dust-dry approx. 30 min.
touch dry approx. 90 min.
over coatable approx. 2 hours
splash-/rain-water proof approx. 16 hours
cured after stoving of at least 1 hour at 200°C / 392°F.
TECHNICAL DATA:
density: 2210 kg/m³
density (solids): 3660 kg/m³
solids: 79 Wt %
48 Vol-%
VOC content: 20.8 Wt %
classification to 2004/42/EC:
VOC value: = 460 g / l
base of binder: heat resistant polysiloxane resin
pigmentation: metal powder (zinc dust) and barrier-pigment (micaceous iron oxide)
colour shades: grey
viscosity on supply: approx. 30 s DIN 53211, slightly pseudoplastic
FILM CHARACTERISTICS
Gloss: matt
Stability:
Recommended Top Coat:
NewProSol HT matt paint white aluminum 906 Article no.: 6039-95890
DELIVERY AND SHIPPING AMOUNTS
(subject to minimum order quantity):
1 pail with 5l = 11.1 ± 0.3 kg 1.10 gal = 24.4 ± 0.6 lbs
other amounts on request.
HEALTH AND SAFETY / STORAGE / ENVIRONMENTAL DATA
Observe the universally applicable guidelines when handling and storing coating materials. Observe all hazard warnings and safety advice printed on the containers.
For more details, please refer to the Material Safety Data Sheets.